Gestetner f104 Guía De Operación
Reception Features
76
4
❒ If the Requesting Party specifies a
Group for the End Receivers and
the total number of End Receivers
exceeds 250, the Transfer Station
cannot transfer the message and
sends a Transfer Result Report to
the Requesting Party.
the total number of End Receivers
exceeds 250, the Transfer Station
cannot transfer the message and
sends a Transfer Result Report to
the Requesting Party.
Reference
p.20 “Transfer Request”
Transfer Result Report
This reports whether transmission to
the End Receivers was successful or
not.
When the Transfer Station has trans-
ferred the message to all End Receiv-
ers, it sends the Transfer Result
Report back to the Requesting Party.
The machine prints the report if it
cannot be sent back to the Requesting
Party.
the End Receivers was successful or
not.
When the Transfer Station has trans-
ferred the message to all End Receiv-
ers, it sends the Transfer Result
Report back to the Requesting Party.
The machine prints the report if it
cannot be sent back to the Requesting
Party.
Preparation
You must program the fax number
of the Requesting Party in a Quick
Dial key or Speed Dial in the
Transfer Station. Also, the return
address of the machine needs to be
programmed beforehand. See
p.160 “Transfer Report”.
of the Requesting Party in a Quick
Dial key or Speed Dial in the
Transfer Station. Also, the return
address of the machine needs to be
programmed beforehand. See
p.160 “Transfer Report”.
Note
❒ You can set whether to print the
document image is printed on this
report with the User Parameters.
See p.146 “User Parameters”
(switch 04, bit 7).
report with the User Parameters.
See p.146 “User Parameters”
(switch 04, bit 7).
-
-
-
-Sending the Transfer Result
Report
This machine compares the fax num-
ber of the Requesting Party with the
Requesting Party's number pro-
grammed in a Quick Dial key or
Speed Dial, and if the last five digits
of the two numbers match, it sends
the Transfer Result report to the Re-
questing Party.
• Requesting Party's own number:
ber of the Requesting Party with the
Requesting Party's number pro-
grammed in a Quick Dial key or
Speed Dial, and if the last five digits
of the two numbers match, it sends
the Transfer Result report to the Re-
questing Party.
• Requesting Party's own number:
44-11-22233333
• Transfer Station's Quick Dial:
011-22233333
Remote Transfer
This feature allows same make or oth-
er make fax machines without the
Transfer Request function to perform
transfer requests to this machine.
er make fax machines without the
Transfer Request function to perform
transfer requests to this machine.
Preparation
In order for this machine to per-
form this function, you need to
register the Remote ID, and the
Transfer Result Report return ad-
dress in Quick Dial keys or Speed
Dials. See p.156 “ID Codes”; p.62
“Quick Dial”, Basic Features; and
p.71 “Speed Dial”, Basic Features.
form this function, you need to
register the Remote ID, and the
Transfer Result Report return ad-
dress in Quick Dial keys or Speed
Dials. See p.156 “ID Codes”; p.62
“Quick Dial”, Basic Features; and
p.71 “Speed Dial”, Basic Features.
Limitation
❒ The Requesting Party's fax ma-
chine must be able to send out a
push signal.
push signal.
❒ The Remote Transfer function only
works with the standard and op-
tional G3 line. NIC FAX unit (Op-
tion for Type1) is not supported.
tional G3 line. NIC FAX unit (Op-
tion for Type1) is not supported.
StellaF2_EN_Combine_F_FM.book Page 76 Friday, February 14, 2003 5:16 PM