Gestetner f104 Manual Suplementario
NIC FAX Initial Settings
43
2
IP-Fax Parameter Settings
Preparation
Select "Yes" with user parameters
to use the gatekeeper for IP-Fax
transmission. See p.166 “User Pa-
rameters” (switch 32, bit 0).
Select "Yes" with user parameters
to use the gatekeeper for IP-Fax
transmission. See p.166 “User Pa-
rameters” (switch 32, bit 0).
AAAA
Press the
{{{{User Tools}}}} key.
The User Tools main menu ap-
pears.
pears.
Note
❒ Make sure that the machine
shows the standby display. If it
does not, see Chapter 1 "Stand-
by Display", Basic Features to re-
turn to the standby display.
does not, see Chapter 1 "Stand-
by Display", Basic Features to re-
turn to the standby display.
BBBB
Press the
0
0
0
0 or 1
1
1
1 key to display
"2. Fax Features".
CCCC
Press the
{{{{OK}}}} key.
DDDD
Press the
0
0
0
0 or 1
1
1
1 key to display
"4. Key Op. Tools" .
EEEE
Press the
{{{{OK}}}} key.
FFFF
Press
{{{{2}}}} {{{{2}}}} {{{{2}}}} {{{{2}}}}, and then
press the
{{{{OK}}}} key.
GGGG
Press the
0
0
0
0 or 1
1
1
1 key to display
"16. IP-Fax Parameter".
Note
❒ The number of the function dif-
fers depending on the options
installed.
installed.
HHHH
Press the
{{{{OK}}}} key.
IIII
Press
0
0
0
0 or 1
1
1
1 to display the item
you want to set, and then press
the
the
{{{{OK}}}} key.
Gatekeeper Address
Gatekeeper is a server which con-
nects the telephone number and
the IP address.
You need to set up the gatekeeper
address to use this function.
A Enter the IP address or host
nects the telephone number and
the IP address.
You need to set up the gatekeeper
address to use this function.
A Enter the IP address or host
name of the gatekeeper.
Note
❒ If you want to enter the gate-
keeper address using the
host name, make sure that
the DNS server address is
specified in advance.
host name, make sure that
the DNS server address is
specified in advance.
❒ You can enter up to 127 char-
acters for a host name.
ZHMS130E