Gestetner f104 Manual Suplementario
Using Internet Fax Functions
84
4
Transfer Request by E-mail
Preparation
In order to use this function, you
must make polling ID and Transfer
Report settings. The same polling
ID must be set for both Transfer
Requester and Transfer Stations.
See Chapter 7 "ID Codes" and
"Transfer Report", Advanced Fea-
tures.
In order to use this function, you
must make polling ID and Transfer
Report settings. The same polling
ID must be set for both Transfer
Requester and Transfer Stations.
See Chapter 7 "ID Codes" and
"Transfer Report", Advanced Fea-
tures.
AAAA
Make sure that the Memory
Trans. indicator is lit.
Trans. indicator is lit.
Note
❒ If the Memory Trans. indicator
is not lit, press the
{{{{Memory
Trans.
}}}} key to change back to
Memory Transmission.
BBBB
Set the original and adjust the
scan settings as necessary.
scan settings as necessary.
Note
❒ Originals are sent at Detail reso-
lution even if 300dpi, Super
Fine, or Extra Super Fine is se-
lected.
Fine, or Extra Super Fine is se-
lected.
CCCC
Press the
{{{{Trans. Option}}}} key.
DDDD
Press the
0
0
0
0 or 1
1
1
1 key to display
"9. Transfer Request", and then
press the
press the
{{{{OK}}}} key.
Note
❒ If you want to make Mail Op-
tions settings, follow steps
to
EEEE
Press the
0
0
0
0 or 1
1
1
1 key to select
"On".
FFFF
Press the
{{{{OK}}}} key.
ZHMS300E
ZHMS280E