Gestetner f9199 Guía De Operación

Printing Functions

123

❒ You can turn this function on or off

with User Parameters. See p.178
“User Parameters” (switch 10 bit
4).

When the size of a received message
is longer than the paper loaded in the
machine, each page of the message
can be split and printed on several
sheets, or reduced and printed on a
single sheet. For example, when
8

1

/

2

"

×11"L paper is loaded, this fea-

ture splits the received message if the
excess length is about 90mm (3.6 in.)
or more, and reduces it if the excess
length is within about 90mm (3.6 in.).
When a message is split, the split
mark (

p) is inserted at the split posi-

tion and about 10mm (0.4 in.) of the
split area is duplicated on the top of
the second sheet.

❒ Your service representative can

customize this feature with the fol-
lowing settings. Bracketed values
are defaults. 
• Reduction (on)
• Print split mark (on)
• Overprinting (on)
• Overprinting length (10mm or

0.4 in.)

• Guideline for split (when mes-

sage is 90mm or 3.6 in. longer
than paper)

❒ You can adjust the overprinting

length and length of reduction
within the following ranges:
• Guideline for split:0 - 155mm (0

- 6.1 in.)

Usually the sender's Fax Header is
printed on received messages. If the
sender has not programmed their Fax
Header, you will not be able to identi-
fy them. However, if you turn this
feature on, the sender's Own Name or
Own Fax Number programmed by
the sender is printed instead so you
can find out where the message came
from. 
• TSI = Transmitting Subscriber

Identification 

❒ You can turn this function on or

off with User Parameters. See
p.178 “User Parameters”(switch
02 bit 3).

If turned on, this information is print-
ed on every page. 
The CIL (Call Identification Line) re-
fers to the combination of the receiv-
er's own fax number, name, the
sender's own fax number and name,
time, and page number. 

B C

A B

∗

2

2

GFBUNK0N

(Document)

A B C