Gestetner f9103 Guía De Operación
Key Operator Settings
70
7
Authorized Reception
You can block junk fax messages and
save paper by limiting the fax mes-
sages that your fax machine receives
to a list of specified senders. If you re-
ceive a fax message from someone
who is not a specified sender, the line
is disconnected immediately as soon
as you receive the call.
• To use this function you must
save paper by limiting the fax mes-
sages that your fax machine receives
to a list of specified senders. If you re-
ceive a fax message from someone
who is not a specified sender, the line
is disconnected immediately as soon
as you receive the call.
• To use this function you must
switch Authorized Reception on
after you register the specified
senders.
after you register the specified
senders.
• You can select to receive fax mes-
sages only from Specified senders,
or you can select to receive all mes-
sages from senders other than
from specified senders. See p.85
“User Parameters” (switch 08, bits
3 and 2).
or you can select to receive all mes-
sages from senders other than
from specified senders. See p.85
“User Parameters” (switch 08, bits
3 and 2).
• In order for this feature to operate
correctly, at least one specified
sender must be registered.
sender must be registered.
AAAA
Press the
{{{{User Tools}}}} key.
BBBB
Press
0
0
0
0 or 1
1
1
1 until " 2. Fax Fea-
tures " is displayed.
CCCC
Press the
{{{{OK}}}} key.
DDDD
Press
0
0
0
0 or 1
1
1
1 until " 4. Key Op.
Tools " is displayed.
EEEE
Press the
{{{{OK}}}} key.
FFFF
Press
{{{{2}}}}{{{{2}}}}{{{{2}}}}{{{{2}}}}.
GGGG
Press the
{{{{OK}}}} key.
HHHH
Press
0
0
0
0 or 1
1
1
1 until "2. Autho-
rized RX" is displayed.
IIII
Press the
{{{{OK}}}} key.
JJJJ
Follow the procedures below to
switch Authorized Reception
On/Off, register a Specified Send-
er, or print a list of Specified
Senders.
switch Authorized Reception
On/Off, register a Specified Send-
er, or print a list of Specified
Senders.
Switching Authorized Reception
On/Off
On/Off
A Press the {{{{OK}}}} key.
B Press 0
0
0
0 or 1
1
1
1 to select "On" or
"Off".
C Press the {{{{OK}}}} key.
Note
❒ If no specified senders are
registered when you select
“On”, you will be prompted
to register a specified sender.
Press the
“On”, you will be prompted
to register a specified sender.
Press the
{{{{OK}}}} key and fol-
low the procedure (steps
C
to
F) for "Registering a Spec-
ified Sender for Authorized
Reception" below.
Reception" below.
StellaF1EN-3_FM.book Page 70 Monday, November 12, 2001 11:40 AM