Preh mc12t3 Guía Del Usuario
10
Important point to menu point AUTO-ADJUST:
Most graphic cards differ in regard to their video signals sent out. For this reason it
could happen that the touchscreen/TFT monitor must be readjusted on connecting it with
another computer. The pre-adjustment of the touchscreen/TFT monitor was done in a
way that it produces good results with a possibly great number of graphic cards. Not
with every combination of resolution and refresh rate can an optimum adjustment be
obtained, however, a good picture quality should be achieved with each resolution.
With an adjustment under Windows it would be best to go to "Shutdown Windows"
picture and to activate the menu point AUTO-ADJUST. By doing this, the display tries to
find the possibly best adjustment. With DOS, the program EDIT is used instead of
picture "Shutdown Windows".
A fine adjustment which might be necessary can be carried out with point PHASE in
menu BASIC SETTINGS. For this fine adjustment you should use either picture
"Shutdown Windows“, a test picture or a monitor test program. In the file: \Touch\Montest
(CD Rom) you will find a monitor test program for the different operating systems.
Besides, the adjustment must be made individually for every video mode (resolution) to
be used. In addition it must be observed that prior to setting the display the graphic card
had been adjusted for the correct parameters (resolution, colour ...). In case of
connection with a notebook it might be necessary to deactivate the internal display of
the notebook in order to obtain a good representation.
could happen that the touchscreen/TFT monitor must be readjusted on connecting it with
another computer. The pre-adjustment of the touchscreen/TFT monitor was done in a
way that it produces good results with a possibly great number of graphic cards. Not
with every combination of resolution and refresh rate can an optimum adjustment be
obtained, however, a good picture quality should be achieved with each resolution.
With an adjustment under Windows it would be best to go to "Shutdown Windows"
picture and to activate the menu point AUTO-ADJUST. By doing this, the display tries to
find the possibly best adjustment. With DOS, the program EDIT is used instead of
picture "Shutdown Windows".
A fine adjustment which might be necessary can be carried out with point PHASE in
menu BASIC SETTINGS. For this fine adjustment you should use either picture
"Shutdown Windows“, a test picture or a monitor test program. In the file: \Touch\Montest
(CD Rom) you will find a monitor test program for the different operating systems.
Besides, the adjustment must be made individually for every video mode (resolution) to
be used. In addition it must be observed that prior to setting the display the graphic card
had been adjusted for the correct parameters (resolution, colour ...). In case of
connection with a notebook it might be necessary to deactivate the internal display of
the notebook in order to obtain a good representation.
The screen resolution, the H-Sync-Frequency and the V-Sync Frequency of the current
picture signal is shown up in the status display.
picture signal is shown up in the status display.
3.3.1 Menu: BASIC SETTINGS
Pict. 14: Menu: „BASIC SETTINGS“
The following parameters of the display can be adjusted in menu BASIC SETTINGS:
BRIGHTNESS
With the keys UP and DOWN the brightness of the picture can be increased or
decreased.
decreased.