ONKYO ht-s3200 Guía Del Usuario

43

With the built-in tuner, you can enjoy AM and FM radio 
stations and store your favorite stations as presets for 
easy selection.

■ Auto Tuning Mode

When tuned into a station, the TUNED indicator 
appears. When tuned into a stereo FM station, the FM 
STEREO indicator also appears.

■ Manual Tuning Mode

The North American model changes FM frequency in 
0.2MHz steps, 10kHz steps for AM. For other models 
it’s 0.05MHz steps for FM and 9kHz (or 10kHz) steps 
for AM.
In Manual Tuning mode, FM stations will be in mono.

Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be 
impossible to get good reception. In this case, switch to 
Manual Tuning mode and listen to the station in mono.

Note:
You can also use the remote controller’s Up and Down 
[

q]/[w] buttons to tune the radio.

Use the [AM] or [FM] input 
selector button to select “AM” or 
“FM”.
In this example, FM has been selected.

(Actual display depends on country.)

q]/[w] button.

Searching stops when a station is 
found.

Band

Frequency

q]/[w] button.

The frequency stops changing when 
you release the button.
Press the button repeatedly to change 
the frequency one step at a time.