ONKYO dv-cp802 Manual De Instrucciónes
13
Getting to Know the DV-CP802
—Continued
J
Play
indicator (25)
This indicator is shown during playback.
K
Pause indicator (25)
This indicator appears when playback is paused.
L
Title & group number
Title and group numbers appear here.
M
Chapter & track number
Chapter and track numbers appear here.
N
Time display
Time information, such as total time, remaining
time, and so on, is displayed here in hours, minutes,
and seconds. Other messages are also displayed.
time, and so on, is displayed here in hours, minutes,
and seconds. Other messages are also displayed.
O
MP3 indicator
This indicator appears while an MP3 track is being
played.
played.
P
Dolby Digital (
D), Dolby Pro Logic
(
PL) & DTS (
) indicators
The Dolby Digital indicator (
D) appears when
a Dolby Digital soundtrack is selected. The Dolby
Pro Logic (
PL) indicator appears when the
DV-CP802’s Dolby Pro Logic decoder is on. The
DTS indicator appears when a DTS soundtrack is
selected.
DTS indicator appears when a DTS soundtrack is
selected.
Q
DISC indicators 1–6 (23)
These indicators show how many discs are loaded.
When the disc tray is closed, all of the disc indica-
tors appear until the DV-CP802 has checked each
bay for the presence of a disc. If a bay is found to
have no disc, the corresponding indicator disap-
pears.
When the disc tray is closed, all of the disc indica-
tors appear until the DV-CP802 has checked each
bay for the presence of a disc. If a bay is found to
have no disc, the corresponding indicator disap-
pears.
For detailed information, refer to the pages in parenthe-
sis.
sis.
A
VIDEO OUTPUT (18)
This socket outputs composite video and can be
connected to a composite video input on a TV or
projector.
connected to a composite video input on a TV or
projector.
B
S VIDEO OUTPUT (18)
This socket outputs S-Video and can be connected
to an S-Video input on a TV or projector.
to an S-Video input on a TV or projector.
C
COMPONENT VIDEO OUTPUT (18)
These sockets output component video and can be
connected to a component video input on a TV or
projector.
connected to a component video input on a TV or
projector.
D
FRONT/D.MIX 1 & 2, SURR 1, CENTER &
SUBWOOFER AUDIO OUTPUT (19)
SUBWOOFER AUDIO OUTPUT (19)
These sockets output 5.1-channel analog audio and
can be connected to a 5.1-channel analog audio
input on an AV receiver, surround sound decoder
can be connected to a 5.1-channel analog audio
input on an AV receiver, surround sound decoder
(Dolby Pro Logic), or other component. The
FRONT/D.MIX 1 & 2 outputs can be used as either
front outputs or downmix outputs (see page 52).
FRONT/D.MIX 1 & 2 outputs can be used as either
front outputs or downmix outputs (see page 52).
E
SURR 2 AUDIO OUTPUT (19)
These sockets output the same analog audio as the
SURR1 outputs and can be connected to the analog
surround back left and right inputs on a 7.1-channel
AV receiver or other component. When using these
sockets, the SURR MODE switch should be set to
1+2.
SURR1 outputs and can be connected to the analog
surround back left and right inputs on a 7.1-channel
AV receiver or other component. When using these
sockets, the SURR MODE switch should be set to
1+2.
F
SURR MODE (AUDIO OUT) switch (19)
This switch is used to set the surround output mode
of the analog multichannel audio outputs. If you
connect the SURR 2 outputs to a 7.1-channel AV
receiver or amp, set this switch to 1+2. This reduces
the output level by 3 dB. If you’re not using the
SURR 2 outputs, set it to 1.
of the analog multichannel audio outputs. If you
connect the SURR 2 outputs to a 7.1-channel AV
receiver or amp, set this switch to 1+2. This reduces
the output level by 3 dB. If you’re not using the
SURR 2 outputs, set it to 1.
Rear Panel
L
R
8 9
J
2 3
1
7
6
5
4