ONKYO HT-SR600 Guía Del Usuario

 

21

 

The speakers can easily be wall mounted by using the 
keyhole slots. To prevent the speaker from vibrating 
against the wall, attach two of the supplied thick rubber 
stoppers to the rear of each speaker.

To mount the front or surround speakers vertically, use 
the keyhole slot shown to hang each speaker on a screw 
that’s securely screwed into the wall.

 

To mount the center speaker horizontally, use the two 
keyhole slots shown to hang each speaker on two screws 
that are securely screwed into the wall.

 

A mounting screw’s ability to support a speaker depends 
on how well it’s anchored to the wall. If you have hollow 
walls, screw each mounting screw into a stud. If there are 
no studs, or the walls are solid, use suitable wall anchors.
Use screws with a head diameter of 5/16" (9 mm) or less 
and a shank diameter of 1/8" (4 mm) or less. With hollow 
walls, use a cable/pipe detector to check for any power 
cables or water pipes before making any holes.
Leave a gap of between 
3/16" (5 mm) and 7/16" 
(10  mm) between the wall 
and the base of the screw 
head, as shown. 
(We recommend that you 
consult a home installa-
tion professional.)

Threaded inserts for machine screws are provided on the 
rear of each speaker for wall-mounting with commer-
cially available speaker mounts or brackets. North 
American models require 1/4-inch screws. Other models 
require M5 (5 mm) screws. Refer to the manual supplied 
with your mounts or brackets for installation details.

 

The portion of the screw that goes into the speaker’s 
threaded insert should be between 1/4" – 5/16" (5 mm – 
8 mm) long.

We recommend using the provided rubber stoppers to 
achieve the best possible sound from your speakers. The 
rubber stoppers prevent the speakers from moving, pro-
viding a more stable platform. Use thick stoppers for the 
center speaker, and thin stoppers for the other speakers.

Thick

rubber

stoppers

Keyhole slot for 
wall mounting

8-9/16" (217 mm)

Keyhole slots for wall mounting

Thick

rubber

stoppers

Wall

3/16" – 7/16"

(5 mm) – (10 mm)

Threaded insert

1/4"
5 mm

1/4" – 5/16"

(5 mm) – (8 mm)

Mount or bracket

(North American model)

(Other models)

1/2" (12 mm)

2-3/16"
(55 mm)

Thin rubber stoppers

Bottom of the 
SKF-350F

Bottom of the 
SKM-350S

Thick rubber stoppers

Bottom of the

SKC-350C

HT-SR600_En.book Page 21 Wednesday, December 27, 2006 4:11 PM