ONKYO TX-NR901 Manual De Instrucciónes
47
Basic Setup
—Continued
Component Video Setup
This section explains how to assign the component video
inputs to input sources. You only need to change this set-
ting if you connect a video component to a component
video input other than the default assignment listed in the
following table, or if you want to output composite video
or S-Video sources from the component video output.
There are no other reasons to change these assignments.
inputs to input sources. You only need to change this set-
ting if you connect a video component to a component
video input other than the default assignment listed in the
following table, or if you want to output composite video
or S-Video sources from the component video output.
There are no other reasons to change these assignments.
Notes:
• If you select Last Valid, the video source remains the
same when you select another input source. For exam-
ple, if you set the VIDEO 1 input source to Last Valid,
then select the DVD input source, then select the
VIDEO 1 input source, you can watch a DVD while
listening to the audio from the component connected
to the VIDEO 1 audio inputs.
ple, if you set the VIDEO 1 input source to Last Valid,
then select the DVD input source, then select the
VIDEO 1 input source, you can watch a DVD while
listening to the audio from the component connected
to the VIDEO 1 audio inputs.
• This procedure can also be performed by using the
input selector buttons, [SETUP] button, [
]/[
]/
[
]/[
] buttons, and [ENTER] button.
Input source
Analog audio
input (fixed)
Component
video inputs
DVD
DVD
INPUT1
VIDEO 1
VIDEO 1
INPUT2
VIDEO 2
VIDEO 2
INPUT2
VIDEO 3
VIDEO 3
INPUT2
VIDEO 4
VIDEO 4
INPUT2
VIDEO 5
VIDEO 5
INPUT2
TAPE
TAPE
Last Valid
TUNER
TUNER
Last Valid
PHONO
PHONO
Last Valid
CD
CD
Last Valid
NET AUDIO
NET AUDIO
Last Valid
1
Press the [INPUT] button, and
then roll the scroll wheel to select
the input source you want to
assign.
then roll the scroll wheel to select
the input source you want to
assign.
2
Press the scroll wheel, and then
press the [SETUP] button.
press the [SETUP] button.
The main menu appears onscreen.
3
Use the Up/Down [
]/[
] but-
tons to select “2. Input Setup,”
and then press the [ENTER] but-
ton.
and then press the [ENTER] but-
ton.
The Input Setup menu appears.
INPUT
ENTER
ENTER
4
Use the Up/Down [
]/[
] but-
tons to select “3. Video Setup,”
and then press the [ENTER] but-
ton.
and then press the [ENTER] but-
ton.
The Video Setup menu appears.
5
Use the Up/Down [
]/[
] but-
tons to select “b. Component
Video,” and then use the Left/
Right [
Video,” and then use the Left/
Right [
]/[
] buttons to select:
INPUT1:
Select if the video compo-
nent is connected to COM-
PONENT VIDEO INPUT
1.
PONENT VIDEO INPUT
1.
INPUT2:
Select if the video compo-
nent is connected to COM-
PONENT VIDEO INPUT
2.
PONENT VIDEO INPUT
2.
VIDEO:
Select this to output com-
posite and S-Video
sources from the COM-
PONENT VIDEO OUT-
PUT.
sources from the COM-
PONENT VIDEO OUT-
PUT.
Last Valid:
Select this for audio-only
components.
components.
None:
Select this if you want no
video to be output when
the input source is
selected.
video to be output when
the input source is
selected.
6
Press the [SETUP] button.
The setup menu closes.
ENTER
ENTER
Advanced Menu
2.Input Setup
2-3.Video Setup
a.Video
:DVD
b.Component Video
:INPUT1
:INPUT1
Quit:|SETUP|
Input:DVD
Input:DVD
ENTER
TX-NR901_En.book Page 47 Wednesday, October 1, 2003 9:44 AM