ONKYO TX-NR901 Manual De Instrucciónes
94
Using the Remote Controller with Other Components
—Continued
With the Macro function you can program the remote
controller to perform a sequence of actions with one
press of a button. For example, normally you need to per-
form the following actions to use a CD player that’s con-
nected to the TX-NR901:
controller to perform a sequence of actions with one
press of a button. For example, normally you need to per-
form the following actions to use a CD player that’s con-
nected to the TX-NR901:
1. Press the scroll wheel, (to select AMP mode).
2. Press the [ON] button (to turn on the TX-NR901).
3. Roll the scroll wheel to select CD (to select the CD
remote controller mode and the CD input source).
4. Press the Play [
] button (to start the CD
player).
With the Macro function you can program the remote
controller to do all of this with one press of a button.
controller to do all of this with one press of a button.
Making Macros
You can make up to eight macros, and each macro can
perform up to eight actions.
perform up to eight actions.
Using Macros
1
Press and hold the [CUSTOM]
button for more than three sec-
onds.
button for more than three sec-
onds.
The remote controller enters Custom
mode.
mode.
2
Roll the scroll wheel to select
“MACRO,” and then press the
scroll wheel.
“MACRO,” and then press the
scroll wheel.
3
Roll the scroll wheel to select
“EDIT,” and then press the scroll
wheel.
“EDIT,” and then press the scroll
wheel.
CUSTOM
4
Roll the scroll wheel to select a
macro, and then press the scroll
wheel.
macro, and then press the scroll
wheel.
Macros are numbered from 1 to 8.
5
On the remote controller, press
the buttons whose actions you
want to program into the macro
in the order you want them per-
formed.
the buttons whose actions you
want to program into the macro
in the order you want them per-
formed.
To program the CD example in the left
column into a macro: press the scroll
wheel, press the [ON] button, roll the
scroll wheel to select CD, press the
scroll wheel, and then press the Play
[
column into a macro: press the scroll
wheel, press the [ON] button, roll the
scroll wheel to select CD, press the
scroll wheel, and then press the Play
[
] button.
Actions are numbered from 1 to 8.
After each button is pressed, “SET” fol-
lowed by “KEY” is displayed.
lowed by “KEY” is displayed.
To add an action that selects an input
source for the main room or Zone 2,
source for the main room or Zone 2,
press the [INPUT] button or [ZONE 2]
button, respectively, roll the scroll
wheel to select the input source, and
then press the scroll wheel.
button, respectively, roll the scroll
wheel to select the input source, and
then press the scroll wheel.
6
When you’ve finished, press the
[MACRO] button.
[MACRO] button.
After the following appears on the dis-
play, the display returns to normal.
play, the display returns to normal.
Macro #1 selected
Action #1
Macro #1 selected
8 actions learnt
MACRO
TX-NR901_En.book Page 94 Wednesday, October 1, 2003 9:44 AM