ONKYO TX-SA705 Guía Del Usuario
59
Basic Operations
This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
Selecting the Input Source
1
3
MULTI CH
1
1
3
MULTI CH
1
Use the AV receiver/AV amplifier’s input selector buttons to select
the input source.
the input source.
To select the input source with the remote controller, press the
[RECEIVER] button, and then use the INPUT SELECTOR buttons.
[RECEIVER] button, and then use the INPUT SELECTOR buttons.
2
Start playback on the source component.
When you select DVD or another video component, on your TV, you’ll need
to select the video input that’s connected to the AV receiver/AV amplifier’s
COMPONENT VIDEO OUT, HDMI OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
When you select DVD or another video component, on your TV, you’ll need
to select the video input that’s connected to the AV receiver/AV amplifier’s
COMPONENT VIDEO OUT, HDMI OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
3
To adjust the volume, use the MASTER VOLUME control, or the
remote controller’s [VOL] button.
The volume can be set to
remote controller’s [VOL] button.
The volume can be set to
−
∞
dB,
−
81 dB through +17, +18 dB.
The AV receiver/AV amplifier is designed for home theater enjoyment. It has
a wide volume range, allowing precise adjustment.
a wide volume range, allowing precise adjustment.
4
Select a listening mode and enjoy!
See “Using the Listening Modes” on page 66.
See “Using the Listening Modes” on page 66.
or
Remote
controller
AV receiver/
AV amplifier
AV amplifier
or
AV receiver/
AV amplifier
AV amplifier
Remote
controller
TX-SR705_En.book Page 59 Monday, May 28, 2007 2:13 PM