TallyGenicom 3860 Guía De Instalación Rápida
3860/80 Quick Reference Guide
17
If the ribbon is twisted, untwist it.
Untwist it as much as possible. There is a resident half-twist in the ribbon
that may end up between the ribbon guide and one end of the cartridge.
The ribbon will still work like this, but will not work if the half-twist is on
the ribbon guide itself. Turn the ribbon advance knob to tighten the
ribbon fabric.
that may end up between the ribbon guide and one end of the cartridge.
The ribbon will still work like this, but will not work if the half-twist is on
the ribbon guide itself. Turn the ribbon advance knob to tighten the
ribbon fabric.
Wiggle the ribbon guide onto the print head nozzle and snap it down flush.
The ribbon guide fits snugly between the exit rollers. Center the ribbon
guide over the print nozzle. Start with the front end of the ribbon guide
pointing slightly up and then rotate it down onto the print head nozzle. It
should snap down into place with moderate pressure.
guide over the print nozzle. Start with the front end of the ribbon guide
pointing slightly up and then rotate it down onto the print head nozzle. It
should snap down into place with moderate pressure.
Flush Fit-No Gap
Ribbon
Guide
Print Head
Nozzle
Printer Ribbon
Ribbon Guide
Ribbon Advance Knob