Lexmark X560N Manual De Usuario
8
Click Edit next to the group that was just created.
9
Select the e-mail addresses to be included in the group, and then click Save Changes to add the addresses to
the group.
the group.
Scanning to an e-mail address
1
Make sure the printer is connected to the network through a print server, and the printer, the print server, and
the computer receiving the scan are all turned on.
the computer receiving the scan are all turned on.
2
Load an original document faceup into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
clippings) into the ADF. Place these items on the scanner glass.
3
If you are loading a document into the ADF, adjust the paper guides.
4
From the printer control panel, press E-mail.
5
Press
or
repeatedly until Email to appears, and then press OK.
6
Press
or
repeatedly to choose the method for selecting a recipient, and then press OK.
7
If you are using the Address Book or Email Group, press
or
repeatedly to select the address that points to
the recipient you want, and then press
to select the address.
8
Repeat this to add additional addresses or groups, and then press OK.
Notes:
•
To change the recipient from To to BCC, or to remove the recipient from the send list, press
repeatedly.
•
To edit the recipient list, follow the instructions at the top of the display.
9
If you want to adjust any scan settings, press
or
repeatedly to select the scan setting to modify, and then
press OK.
Note: The scan settings are only changed temporarily. After returning to Select Function, the current
default settings are restored.
default settings are restored.
10
Press Start
to begin scanning to e-mail.
11
When the scan is finished, press
repeatedly until Select Function appears.
Customizing the default scan settings from the
printer control panel
Adjusting the auto exposure of scanned images
When using originals printed on thin paper, text or images printed on one side of the paper can sometimes be seen
on the other side of the paper. To prevent this from happening in your scanned document, and to improve the quality
for two-sided scanned pages, use the Auto Exposure setting on the printer control panel. This setting minimizes the
sensitivity of the scanner to variations in light background colors.
on the other side of the paper. To prevent this from happening in your scanned document, and to improve the quality
for two-sided scanned pages, use the Auto Exposure setting on the printer control panel. This setting minimizes the
sensitivity of the scanner to variations in light background colors.
1
From the printer control panel, press System.
2
Press
or
repeatedly until Default Settings appears, and then press OK.
Scanning
81