GE ZET3058 Guia De Especificaciones
ZET3058SH/WH/BH – GE Monogram 30" Built-In Double Oven
with Trivection
™
Technology
Specification Revised 6/04
130313
Dimensions (in inches)
CL
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
(Must support 375 lbs.)
Note: Cabinets installed adjacent to wall ovens must have an
adhesion spec of at least a 194°F temperature rating.
Installation Information: Before installing, consult installation
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
Electric wall ovens are not approved for installation
with a plug and receptacle. They must be hard wired in
accordance with installation instructions.
KW Rating
240V
8.9
208V
6.7
Breaker Size
240V
40 Amps
208V
40 Amps
21" min.
Door Opening
Allowance
B
A
Cutout Height
51-13/16" min.
51-15/16" max.
Recommended
Cutout Location
12" from the floor
Cutout Width
28-1/2'' min.
28-5/8'' max.
Cabinet
Width 30"
23-1/4''
29-3/4''
52-7/8''
Note: Most 30'' wall cabinets can be used with this unit.
The opening between the inside walls must be at least 28-1/2'' wide.
A = Allow 11/16" - 3/4" for overlap of oven over side edges of cutout.
B = Allow 1" overlap of oven over top and 1-1/4" overlap at the bottom
edges of cutout.
Cutout Depth
23-1/2'' min.
Bottom of
Cutout
Acceptable
junction box
location area
DWO
DWO
jt980_install_ii.eps
32"
25"
7"