Boundless adds 4000 Guía Del Usuario

4 Introduction

Physical Features

Keyboard Connector – push in the keyboard connector here.

2. Tilt and Swivel Base – use the tilt and swivel arrangement to

adjust the viewing angle. Grasp the lower corners of the
terminal and push up or down, or twist left or right.

3. Power Switch – “0” is off; “1” is on.

Leave the terminal’s power switch in the off position (“0”) until
power, keyboard, and communication connections are made.

4. Contrast Dial – adjust the contrast between characters of

different intensities by rotating the dial.

5. Brightness Dial – adjust the overall screen brightness by

rotating the dial.

6. Power Connection – plug the female end of the power cord into

this connector and the male end of the cord into a properly
grounded receptacle.

The Canadian Standards Association (CSA) recommends that
the power outlet be near the terminal and easily accessible at
all times.

Parallel Printer Port – connect the cable from the
IBM/Centronics compatible parallel printer to this port. See
the Installation chapter for options.

8. Printer Port – connect the cable from a serial printer here. See

the Installation chapter for options.