Boundless adds 4000 Guía Del Usuario

    Note To Installer      52 

Note To Installer 

 

This equipment complies with the FCC Regulation for Class A devices, Subpart J of Part 15.  Shielded, grounded interface 
cables were used on all ports for FCC radiated emission testing. 
The manufacturer is not responsible for any violation of the FCC Regulation for Class A devices that is caused by 

unauthorized modification of the equipment, or caused by equipment installation not in accordance with the instructions 

in this manual. 
This equipment generates, uses, and can radiate radio frequency energy and may cause radio or television interference.  

All user equipment that interfaces with other products should be connected with shielded cables.  (Contact a local dealer 

for more information on shielded cable assemblies and their availability.)  
There is no guarantee that interference will not occur.  If radio or television interference occurs (this can be determined by 

turning the equipment off and on while the radio or television is on), the user is solely responsible for correcting the 

interference and is encouraged to take one or more of these measures:    

1.  Reorient the receiving antenna.  
2.  Relocate the equipment, or move the equipment away from the receiver.  

3.  Plug the equipment into a different outlet so the unit and receiver are on different branch circuits.  

4.  Consult the dealer or an experienced radio/television technician.        

It is also suggested that the user read the FCC booklet entitled “How to Identify and Resolve Radio-TV Interference 

Problems”.  The booklet is available from the US Government Printing Office, Washington, DC 20402.  (When ordering the 

booklet, specify stock number 04-000-00345-4.) 

Site Preparation   
The screen display geometry on terminal products is aligned using magnetic devices.  External magnetic fields created by 

other types of electronic equipment, such as printers, in very close proximity to the terminal, may cause minor display 

distortion.   
Examples of display distortion include:  

ƒ 

Shaky video   

ƒ 

Wavy lines   

ƒ 

Tilted display 

This magnetic field interaction only occurs over a very short distance, normally less than twelve inches, and can be corrected by separating the 
equipment and/or slightly reorienting the display. 
 
 

Technical Support 

Questions about this product should be directed to the Technical Support Department of the distributor from 
which you obtained your Boundless Technologies equipment. When requesting assistance, please have all 
pertinent information available including any error messages that may have appeared either on the terminal or 
the host. 

If your distributor fails to provide adequate support for your needs, please contact the Boundless Technologies 
Technical Support Department directly. You will be required to provide the name of your distributor, and a 
description of the problem as described above. 

Please refer to the Boundless Technologies Guide to Support Services which was packaged with the terminal. 

Boundless Technologies can be reached at: 

 

Boundless Technologies, Inc. 
Technical Support Department 
50 Engineers Lane, Unit 2 
Farmingdale, NY 11735-1208 
 
(800) 231-5445 ext. 1498 (voice)  Ù  (631) 962-1498 
(631) 962-1505 
 
Email: 

ftp: 

Web site: