Elmo dvr v5.01 Manual De Usuario

c. To adjust the detection zone position on the screen, click on the desired detection zone, hold the left mouse button

down and drag the selected zone to the desired position.

d. Click Undo to delete the last detection zone

e. Click Clear to delete all detection zones for the selected camera

f. Name the detection zone in the Area field if required. Enter the desired name in the text field under the live

view window.

4. Set the Active Time for each detection zone. In the example below, the Area alarm is active from 8 AM to 5

PM.

Note

Active Time must be configured. Unless the
Active Time is set, object detection will not
occur in the selected area.

5. Configure the Alarm Output Setting for the selected detection zone

a. Check the Send Email checkbox to send an emergency Email every time that the alarm is triggered in this

detection zone. The email address is must be configured in the Email Setup tab.

b. Check the Audio Dial Out checkbox to make an emergency phone call every time that the alarm is triggered

in the Area. Emergency phone numbers must be configured in the Communication Setup tab.

Note

If the Audio Dial Out checkbox is enabled,
the chosen *.wav file will be played as a
message for the emergency phone call.

c. Select the Sound Wave File for the audio alarm

Click the Browse button

and locate the *.wav sound file that will play every time that the alarm is

triggered

ii. Click Open

ELMO DVR User Manual v5.01

VideoLogix™ Setup

ELMO DVR Server