Craden dp8 Guía Del Usuario
3.4
Document Insertion
Insertion procedures may be customized to satisfy varied applications and user preferences.
(See the Printer Parameters in 3.5.1).
(See the Printer Parameters in 3.5.1).
If auto alignment is enabled, gently insert the document upper left corner toward the point
where the left edge guide and the feed rollers meet. Release the document when the rollers
grip it and it will be automatically aligned and inserted to the first print line.
where the left edge guide and the feed rollers meet. Release the document when the rollers
grip it and it will be automatically aligned and inserted to the first print line.
Auto alignment may be disabled for an individual document by pressing the FUNCT key
before insertion or for all documents by changing the SKEW CORRECT printer parameter.
When auto alignment is disabled, the left document edge should be aligned to the left edge
guide and then slid forward into the feed rollers which will insert it to the first print line.
before insertion or for all documents by changing the SKEW CORRECT printer parameter.
When auto alignment is disabled, the left document edge should be aligned to the left edge
guide and then slid forward into the feed rollers which will insert it to the first print line.
The PAUSE printer parameter may be set to delay when the rollers activate for a few seconds
or until the A
or until the A
key is pressed. This allows more time to insert cumbersome documents or to
train new users. With auto alignment enabled the printer should be configured for no delay.
The DOCUMENT INSERT printer parameter may be set to move the document to the last
(bottommost) rather than the first printable line.
(bottommost) rather than the first printable line.
The BEGIN PRINTING printer parameter may be set to delay printing until ENTER is pressed.
This allows the operator to insure that the document has inserted correctly. If not, it may be
EJECTed and reinserted.
This allows the operator to insure that the document has inserted correctly. If not, it may be
EJECTed and reinserted.
3.5 Configuration
The printer may be configured from the keypad with all parameters saved in a non-volatile
memory. There are 4 configuration categories:
memory. There are 4 configuration categories:
Configuration Category
Press
Printer Parameters
9 2 then FUNCT
Communication Parameters
9 3 then FUNCT
Override Parameters
9 9 then FUNCT
Service Parameters
9 4 then FUNCT
After accessing a category, each parameter will be displayed. Press A
to display the next
choice for the parameter or press ENTER to display the next parameter. If the display does not
change when A
change when A
is pressed, the keypad is locked.
See 3.5.3 to unlock the keypad.
Document edge
guide
1
5