Samsung srp-770 Guía Del Usuario

 

3-2 Interface Cable Connection 
 
Connect the interface cable as shown below. 
 
This printer supports the following communications interface standards. 
 

-

 RS-232C 

(Serial) 

-

 IEEE1284 

(Parallel) 

-

 USB 

-

  Ethernet (exclusively for SRP-770IIE) 

 

 

 
 
 

 
 

 
 
 
1) Turn off the power switch. 
 

2) Connect the communication cable to the printer communication port to be used. 

- For a Serial cable, secure by tightening the screws on both sides. 
- For a Parallel cable, secure by fastening the clips on both sides. 
- Connect USB cable when using USB interface. 
- Connect LAN cable when using Ethernet interface. 

USB Cable 

RS-232 (Serial) Cable 

IEEE1284 (Parallel) Cable 

or LAN (Ethernet ) Cable