Samsung CLP-610 Manual De Usuario

6.5   

<Maintenance>

Grasp the handles on the empty toner cartridge and pull to remove 
the cartridge from the machine.

If you open the front door, be careful not to touch the 
underneath of the control panel (the lower part of the fuser unit). 
The temperature of the fuser unit might be high and could 
damage your skin.

When you open the front door and work inside the machine, it is 
highly recommend that you remove the paper transfer belt first. 
Because the work you do could contaminate the paper transfer 
belt.

Take a new toner cartridge out of its package.

• Don't use sharp objects, such as a knife or scissors, to open 

the toner cartridge package. You could damage the surface of 
the toner cartridge.

• To prevent damage, do not expose the toner cartridge to light 

for more than a few minutes. Cover it with a piece of paper to 
protect it if necessary.

Holding both handles on the toner cartridge, thoroughly rock it from 
side to side to evenly distribute the toner. 

Place the toner cartridge on a flat surface, as shown, and remove 
the paper covering the toner cartridge by removing the tape.

If toner gets on your clothing, wipe it off with a dry cloth and 
wash it in cold water. Hot water sets toner into fabric.

Make sure the color of the toner cartridge matches the color slot and 
then grasp the handles on the toner cartridge. Insert the cartridge 
until it clicks into place.

Close the front cover. Make sure the cover is securely latched, and 
then turn the machine on.

If the front cover is not completely closed, the machine will not 
operate.