Samsung CLP-600 Guía Del Usuario

Setting Up Your Printer

2.6

Squeeze the paper width guide, as shown and slide it to 
the stack of paper until it lightly touches the side of the 
stack. Do not push the guide too tightly against the edge 
of the paper as it may cause the paper to bend.

: 

• Do not push the width guide far enough to cause the 

material to warp. 

• If you do not correctly adjust the width guide, it may cause a 

paper jam.

Load paper with the print side facing up. For more 
information, see steps 4 and 5 on page 2.4.

To replace the tray, lower the rear edge, align it with the 
slot, and slide it into the printer.

To print from your computer in a local environment, you need 
to connect your printer to the computer with a Universal Serial 
Bus (USB) cable.

If you are a Macintosh user, you can use only a USB cable.

: Connecting the printer to the USB port of the computer 

requires a certified USB cable. You will need to buy a USB 2.0 
compliant cable that is 3m or less in length. 

Make sure that both the printer and the computer are 
turned off.

Plug the USB cable into the connector on the left rear of 
the printer.