Samsung CLP-600 Guía Del Usuario

Using Print Materials

4.2

:

 Do not use carbonless paper or tracing paper. These 

types of paper are unstable at the fusing temperature and can 
give off fumes, or cause damage to the printer.

Proper paper loading helps prevent paper jams and ensures 
trouble-free printing. Do not remove the paper tray while a job 
is printing. Doing so may cause a paper jam. See “Sizes and 
Capacities” on page 4.1 for acceptable paper capacities for 
each tray. 

: This printer does not spport transparencies.

Load the print material you use for the majority of your print 
jobs in Tray1.

Tray1 can hold a maximum of 250 sheets of plain A4 or letter-
sized paper.

You can purchase an optional tray, Tray2, and attach it below 
Tray1, to load an additional 500 sheets of paper. See 9.1 for 
more information about installing the optional Tray2.

To load paper, pull the tray and the load the paper 

print side up.

For details about loading paper in the paper tray, see “Loading 
Paper” on page 2.4

 

:

 If you experience problems with paper feed, place one 

sheet at a time in the Multi-purpose Tray.

The optional tray, Tray2, can hold a maximum of 500 sheets of 
plain paper.

To load paper in Tray2, follow the instructions for loading paper 
on page 2.4.

The Multi-purpose Tray is located on the right side of your 
printer. It can be closed when not in use, making the printer 
more compact. 

The Multi-purpose Tray can hold several sizes and types of 
material, such as cards and envelopes. You may also want to 
use the Multi-purpose Tray for single page print jobs on 
letterhead, colored paper for use as separator sheets, or other 
special materials that you do not normally keep in the paper 
tray. You can load approximately 100 sheets of plain paper, 10 
envelopes, 10 sheets of card stock, or 10 labels at a time. 

• Load only one size of print material at a time in the 

Multi-purpose Tray.

• To prevent paper jams, do not add paper when there is still 

paper in the Multi-purpose Tray. This also applies to other 
types of print materials.

• Print materials should be loaded face down with the top edge 

going into the Multi-purpose Tray first, and be placed in the 
center of the tray.

Multi-purpose Tray