Samsung CLP-600 Guía Del Usuario
Solving Problems
7.10
C
AUTION
:
• Do not touch the fuser inside the inner cover. It is hot and
could cause burns! The fuser’s operating temperature is
180°C (356°F). Take care when removing paper from the
printer.
180°C (356°F). Take care when removing paper from the
printer.
• Do not touch the green surface, the OPC drum, on the front
of each toner cartridge with your hands or any other
material. Use the handle on each cartridge in order to avoid
touching this area.
material. Use the handle on each cartridge in order to avoid
touching this area.
• Be careful not to scratch the surface of the paper transfer
belt.
• If you leave the access door open for more than a few
minutes, the OPC drum can be exposed to light. This will
cause damage to the OPC drum. Close the access door
should the installation need to be halted for any reason.
cause damage to the OPC drum. Close the access door
should the installation need to be halted for any reason.
6
Open the outer jam cover in Tray2.
7
Open the inner cover of Tray2.
8
Pull the jammed paper out in the direction shown. To
avoid tearing the paper, pull it out gently and slowly.
avoid tearing the paper, pull it out gently and slowly.
9
Close the two jam covers and go to step 13.
If you cannot find the jammed paper, or if there is any
resistance removing the paper, stop pulling and continue
to step 10.
resistance removing the paper, stop pulling and continue
to step 10.