Samsung CLP-600 Guía Del Usuario

vii

Replacing the Fitted Plug (for UK Only)

MPORTANT

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has

a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13

amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do

not use the plug until you have another fuse cover.
Please contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable.

However, some buildings (mainly old ones) do not have normal 13 amp plug sockets.

You need to buy a suitable plug adaptor. Do not remove the moulded plug.
W

ARNING

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric shock if you
plug it into a socket.

MPORTANT

WARNING

: You must earth this machine.

The wires in the mains lead have the following color code:

• Green and Yellow:

Earth

• Blue: Neutral
• Brown: Live

If the wires in the mains lead do not match the colors marked in your plug, do the

following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by the

safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” or colored

black.
You must connect the brown wire to the pin which is marked with the letter “L” or colored

red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.

EU Declaration of Conformity (LVD,EMC)

For the following product :
Manufactured at :

We hereby declare, that all major safety requirements, concerning to CE Marking

Directive[93/68/EEC] and Low Voltage Directive [73/23/EEC], ElectroMagnetic
Compatibility [89/336/EEC], amendments [92/31/EEC] are fulfilled, as laid out in the
guideline set down by the member states of the EEC Commission.
This declaration is valid for all samples that are part of this declaration, which are
manufactured according to the production charts appendix.

The standards relevant for the evaluation of safety & EMC requirements are as

follows :

1. Certificate of conformity / Test report issued by :

2. Technical documentation kept at :

which will be made available upon request.

LVD : Intertek SEMKO AB

EMC : SAMSUNG Electronics EURO Q.A. Lab. in the U.K.

Color Laser Beam Printer

(Product name)

CLP-600, CLP-600N

(Model Number)

Samsung Electronics Co.,Ltd. #259, Gongdan-Dong, Gumi-City, Gyungbuk

KOREA. 730-030

(factory name, address)

LVD : IEC60950-1:2001(1st Edition), EN 60950-1:2001+A11:

EMC : EN55022:1998+A1:2000+A2:2003, EN55024:1998+A1:2001+A2:2003,

EN61000-3-2:2000, EN61000-3-3:1995+A1:2001

* EN55022:1998+A1:2000+A2:2003 - Radiated Emission(No ferrite clamps on the

floor in accordance ٜۑ1:2000)

Samsung Electronics Co.,Ltd.

Samsung Electronics Co.,Ltd.
#259,Gongdan-Dong,Gumi-City
Gyungbuk, Korea 730-030

Whan-Soon Yim / Senior Manager

(place and date of issue)

(name and signature of authorized person)

Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way
Yateley, Hampshire,

GU46 6GG, UK

Yong-Sang Park / Manager

(place and date of issue)

(name and signature of authorized person)

(Manufacturer)

(Representative in the EU)