Samsung ML-1210 Manual De Usuario
P
RINT
M
EDIA
4.4
Selecting the Output Location
The printer has two output locations: the face-up output slot and the face-down output
tray. You can select the output location by changing the position of the output lever on the
front of the printer. To use the face-down output tray, be sure the output lever is in upper
(normal) position. To use the face-up output slot, push the output lever down.
tray. You can select the output location by changing the position of the output lever on the
front of the printer. To use the face-down output tray, be sure the output lever is in upper
(normal) position. To use the face-up output slot, push the output lever down.
• If paper coming out of the face-down output tray has problems, such as excessive curl, try
printing to the face-up output slot.
• To avoid paper jams, do not change the position of the output lever while printing.
The face-down output tray collects paper
in face-down order. To use, make sure
the output lever is in the upper position.
(If it is not, push it up)
in face-down order. To use, make sure
the output lever is in the upper position.
(If it is not, push it up)
The face-down output tray should be
used for most print jobs and is
recommended when printing large jobs.
used for most print jobs and is
recommended when printing large jobs.
The printer prints to the face-up output
slot if open. Push the output lever down
to open the slot. Paper will come out of
the printer face-up.
slot if open. Push the output lever down
to open the slot. Paper will come out of
the printer face-up.
Using the face-up output slot might
improve output quality with the following:
improve output quality with the following:
• envelopes
• labels
• Transparency films
• paper heavier than 24 lb (90 g/m
• labels
• Transparency films
• paper heavier than 24 lb (90 g/m
2
)
Printing to the Face-Down Output Tray
Printing to the Face-Up Output Slot