Samsung clp-775 Manual De Usuario

Media and tray_ 44

The multi-purpose tray can hold special sizes and types of print material, 

such as postcards, note cards, and envelopes. It is useful for single page 

printing on letterhead or colored paper.

Print media should be loaded face down with the top edge going into 

the multi-purpose tray first and be placed in the center of the tray.

•

Load only one type, size and weight of print media at a time in the 

multi-purpose tray.

•

To prevent paper jams, do not add paper while printing when there is 

still paper in the multi-purpose tray. This also applies to other types 

of print media.

•

Always load the specified print media only to avoid paper jams and 

print quality problems. (See "Print media specifications" on page 92.)

•

Flatten any curl on postcards, envelopes, and labels before loading 

them into the multi-purpose tray.

1. Hold the handle of multi-purpose tray and pull it down to open.

2. Flex or fan the edge of the paper stack to separate the pages before 

loading papers.

To keep paper with perforated lines from sticking together 

when printing, you must fan the sheets before feeding them 

into the machine.

3. Load the paper.

4. Squeeze the multi-purpose tray paper width guides and adjust them 

to the width of the paper. Do not force them too much, or the paper 

will bent resulting in a paper jam or skew.

•

When printing the special media, you must follow the 

loading guideline. (See "Printing on special media" on 

•

When papers overlap when printing using Multi-purpose 

tray, open tray 1 and remove overlapping papers then try 

printing again. 

•

When paper does not feed well while printing, push the 

paper in manually until it starts feeding automatically. 

5. When you print a document, set the paper type and size for the 

multi-purpose tray.
For information about setting the paper type and size on the control 

panel. (See "Setting the paper size and type" on page 47.)

The settings made from the machine driver override the 

settings on the control panel.

a)

To print in application, open an application and start the 

print menu.

b)

Open Printing Preferences. (See "Opening printing 

c)

Press the Paper tab in Printing Preferences, and select 

an appropriate paper type.