Samsung ml-1440 Guía Del Usuario
7.24
P
ROBLEM
S
OLVING
Common Windows Problems
Note: Refer to Microsoft Windows 9x, Me, NT 4.0, 2000 or XP documentation that came with your
PC for further information on Windows error messages.
Possible Cause and Solution
Quit all software applications. Remove all software from the
StartUp Group, then restart Windows. Reinstall the printer
driver.
StartUp Group, then restart Windows. Reinstall the printer
driver.
• Make sure that the cables are connected correctly, the
printer is on, and the Data light on the control panel is on.
• If bi-directional communication is not turned on in the
driver, it will also cause this message.
• From the Start menu, select Settings, then Printers.
Right-click on the Samsung ML-1440 Series printer icon
and select Properties. From the Details tab, click on
Port Settings. Remove check from Check Port State
before Printing box and click OK. From Spool Settings,
select Print Directly to Printer and click OK. Try
printing again.
and select Properties. From the Details tab, click on
Port Settings. Remove check from Check Port State
before Printing box and click OK. From Spool Settings,
select Print Directly to Printer and click OK. Try
printing again.
Close all other applications, reboot Windows, and try
printing again.
printing again.
Problem
“File in Use” message
appears during installation.
appears during installation.
“Error Writing to LPTx”
message appears.
message appears.
“General Protection Fault”,
“Exception OE”, “Spool32”,
or “Illegal Operation”
messages appears.
“Exception OE”, “Spool32”,
or “Illegal Operation”
messages appears.