Samsung ml-1440 Guía Del Usuario
2.8
S
ETTING
U
P
Y
OUR
P
RINTER
1
Make sure that both the printer and
the computer are turned off.
the computer are turned off.
2
Plug the parallel printer cable into the
connector on the back of the printer.
connector on the back of the printer.
Push the metal clips down to fit inside
the notches on the cable plug.
the notches on the cable plug.
3
Connect the other end of the cable to
the parallel interface port on your
computer, and tighten the screws.
the parallel interface port on your
computer, and tighten the screws.
See your computer documentation if
you need help.
you need help.
Connect to the Computer
with a Parallel Cable
with a Parallel Cable
➞ To the parallel
port on PC
1
Plug the power cord into the power
receptacle on the back of the printer.
receptacle on the back of the printer.
2
Plug the other end into a properly
grounded AC outlet.
grounded AC outlet.
3
Turn on the power.
Turn on the Printer
➞ To AC outlet
If you are using a USB interface
Go to “Installing USB Driver” on
Note: USB cable shorter than 3m is recommended.
Note: To connect the printer to the parallel port of the computer requires a certified parallel cable.
You will need to buy the IEEE1284 compliant cable.