Samsung CLX-6200 Guía Del Usuario

28 _Maintenance

To get the most from the toner cartridge, keep the following guidelines in 
mind:
•

Do not remove the toner cartridge from its package until ready for use. 

•

Do not refill the toner cartridge. The machine warranty does not cover 

damage caused by using a refilled cartridge.

•

Store toner cartridges in the same environment as your machine.

•

To prevent damage to the toner cartridge, do not expose it to light for 

more than a few minutes.

The life of the toner cartridge yield depends on the amount of toner that print 

jobs require. The actual number may also be different depending on the 
print density of the pages you print on, and the number of pages may be 

affected by operating environment, printing interval, media type, and media 

size. If you print a lot of graphics, you may need to change the cartridge 
more often.

When a toner is low, faded or light areas may appear. You can temporarily 
improve print quality by redistributing the toner.
1. Open the front cover.

2. Pull the toner cartridge out and remove it from the machine.

3. Gently shake the toner cartridge from side to side five or six times to 

redistribute the toner. 

For ML-2240 Series, if you have installed the dust cover, remove the 

dust cover before opening the front cover. 

•

Avoid reaching too far into the machine. The fusing area may be 

hot.

•

To prevent damage to the toner cartridge, do not expose it to light 

for more than few minutes.

•

Do not touch the green surface (or sky blue), the OPC drum, with 

your hands or any other material. Use the handle on the cartidge 
to avoid touching this area.

•

Be careful not to expose the green surface (or sky blue), the OPC 

drum, into light. This will cause damage to the OPC drum. Cover 
the toner cartridge’s OPC drum with paper to avoid damaging it 

from the light.

•

Do not turn the toner cartridge over.

Because the machine is very light, it may be moved when you use it; 

for example, when opening/closing the tray or installing/removing the 

toner cartridge. Be careful not to move the machine. 

If toner gets on your clothing, wipe it off with a dry

cloth and wash it in cold water. Hot water sets toner into

fabric.