Samsung ml-2545 Guía Del Usuario

Introduction_ 19

The color of the LEDs indicates the machine's current status.

•

Small amount of toner is left in the 
cartridge. The estimated cartridge life

a

a.Estimated cartridge life means the expected or estimated toner cartridge 

life, which indicates the average capacity of print-outs and is designed 

pursuant to ISO/IEC 19752. The number of pages may be affected by 

operating environment, printing interval, graphics, media type and media 

size. Some amount of toner may remain in the cartridge even when red 

LED is on and the printer stops printing.

 

of toner is close. Prepare a new 

cartridge for replacement. You may 

temporarily increase the printing 

quality by redistributing the toner. (See 

•

A toner cartridge has almost reached 
its estimated cartridge life

. It is 

recommended to replace the toner 

cartridge. (See "Replacing the toner 

cartridge" on page 53.)

•

All Toner cartridges is at normal 

capacity.

•

The machine is off-line.

•

When the LED slowly bilnks, the 

machine is receiving data from the 

computer.

•

When the LED rapidly blinks, the 

machine is printing data. 

•

The machine is on-line and can be 

used.

•

A minor error has occurred and the 

machine is waiting for the error to be 

cleared. When the problem is cleared, 

the machine resumes. 

•

The cover is opened. Close the cover.

•

There is no paper in the tray. Load 

paper in the tray. (See"Loading paper 

in the tray" on page 27.)

•

The machine has stopped due to a 

major error. 

•

A paper jam has occurred. 

(See "Clearing paper jams" on 

page 45.)

Samsung does not recommend using non-genuine Samsung toner 

cartridge such as refilled or remanufactured. Samsung cannot 

guarantee non-genuine Samsung toner cartridge's quality. Service or 

repair required as a result of using non-genuine Samsung toner 

cartridges will not be covered under the machine warranty. 

You also can resolve the error with the guideline from the computers’s 

Samsung Printer Status or Smart Panel program window. If the 

problem persists, call for service.

1. Plug in the power cord.
2. Press 

 (power button) on the control panel.