Samsung ml-2545 Guía Del Usuario

Media and tray_ 30

Postcards, cards and other custom-sized materials can be printed with this 

machine.

•

Do not print on media smaller than 76 mm (3.00 inches) wide or 127 mm 

(5.00 inches) long.

•

In the software application, set margins at least 6.4 mm (0.25 inches) 

away from the edges of the material.

•

If media weight is over 160 g/m

2

 (43 lb), try printing in the rear cover 

(face up).

•

Letterhead/ Preprinted paper must be printed with heat-resistant ink that 

will not melt, vaporize, or release hazardous emissions when subjected 

to the machine’s fusing temperature (about 170°C(338 °F)) for 0.1 

second. 

•

Letterhead/ Preprinted paper ink must be non-flammable and should not 

adversely affect machine rollers.

•

Forms and letterhead should be sealed in a moisture-proof wrapping to 

prevent changes during storage.

•

Before you load letterhead/preprinted paper, verify that the ink on the 

paper is dry. During the fusing process, wet ink can come off preprinted 

paper, reducing print quality.

•

Make sure not to use the inkjet photo paper with this machine. It could 

cause damage to the machine. 

Load one paper to the manual tray at a time, glossy side facing up. 

•

Recommended media: Glossy paper (Letter) for this machine by HP 

Brochure Paper (Product: Q6611A) only.

•

Recommended media: Glossy paper (A4) for this machine by HP 

Superior Paper 160 glossy (Product: Q6616A).

The surface of the output tray may become hot if you print a large 

number of pages at once. Make sure that you do not touch the 

surface, and do not allow children near it.

The printed pages stack on the output support, and the output support will 

help the printed pages to align. The printer sends output to the output tray 

by default. To use the output tray, make sure that the rear cover is closed.