Samsung ml-2550 Manual De Usuario

U

SING

 P

RINT

 M

ATERIALS

4.23

Open the Multi-Purpose Tray and the rear output tray.

Load print material with print side up and short edge first. 
Adjust the guide to fit the width of the material stack.

When you print, configure the paper source, type and size 
properly in the software application. For details, see 
page 5.7. 

 If the size of your print material is not listed in the 

 

box in the 

 tab of the printer driver properties, click the 

Custom button and set the size manually. See page 5.7.

When you use 

76 by 127 mm

 (3 by 5 in. )paper and it 

is too thin, a paper jam may occur. Use the card stock heavier than 
105g/m

2

For details about setting on the control panel, see page 
page 3.5.

After printing, close the Multi-Purpose Tray and the rear 
output tray.