Samsung ML-3470 Manual De Usuario

.3   

<Maintenance>

When the toner cartridge is near the end of its life:
•  White streaks or light printing occurs. 
•  Toner Low appears on the display.
•  The Smart Panel program window appears on the computer telling 

you that the toner level is low.

•  The Status LED blinks red.

If this happens, you can temporarily reestablish print quality by 
redistributing the remaining toner in the cartridge. In some cases, white 
streaks or light printing will still occur even after you have redistributed 
the toner.

Open the front cover.

Pull the toner cartridge out.

• Avoid reaching too far into the printer. The fusing area may 

be hot.

• To prevent damage to the toner cartridge, do not expose it 

to light for more than a few minutes. Cover it with a piece of 
paper, if necessary. 

• Do not touch the green surface underside of the toner 

. Use the handle on the cartridge to avoid touching 

this area.

Thoroughly roll the cartridge 5 or 6 times to distribute the toner 
evenly inside the cartridge. 

If toner gets on your clothing, wipe it off with a dry cloth and 
wash clothing in cold water. Hot water sets toner into fabric.

Hold the toner cartridge by the handle and slowly insert the 
cartridge into the opening in the printer. 

Tabs on the sides of the cartridge and corresponding grooves 
within the printer will guide the cartridge into the correct position 
until it locks into place completely.

Close the front cover. Make sure that the cover is securely closed.

When the toner cartridge is completely empty:
•  Toner Low Replace Toner appears on the display.
•  The Smart Panel program window appears on the computer telling 

you that the toner cartridge is empty.

•  The Status LED blinks red.

At this stage, the toner cartridge needs to be replaced. For order 
information for toner cartridges, see page 7.1.

Open the front cover.

Pull the toner cartridge out.