Samsung ml-4050 Manual De Usuario
10.3
<Installing accessories>
Removing a DIMM
To expand the printer memory to 512 MB, you need to remove the
preinstalled 64 MB DIMM and install two 256 MB DIMMs into the DIMM
slots.
preinstalled 64 MB DIMM and install two 256 MB DIMMs into the DIMM
slots.
Push the latches at both ends of the DIMM slot away to remove the
DIMM and pull out the DIMM.
DIMM and pull out the DIMM.
Installing a wireless network interface card
The machine is equipped with a network interface which allows you to
use your printer on a network. You can also purchase a wireless network
interface card to enable the use of the printer in wireless network
environments. For information about installing the network printer server,
see the network printer server user’s guide.
use your printer on a network. You can also purchase a wireless network
interface card to enable the use of the printer in wireless network
environments. For information about installing the network printer server,
see the network printer server user’s guide.
The order information is provided for optional wireless network interface
card. (Page 7.1)
card. (Page 7.1)
1
Turn the printer power off and unplug the power cord and printer
cable from the printer.
cable from the printer.
1
2
1
DIMM
2
latch
2
Remove the duplex-slot cover or the duplex unit from the back of
the printer.
the printer.
3
Grasp the control board cover and remove it.
4
Align the wireless network interface card into the guide, and align
the connector on the card with the connector on the control board.
Push the card firmly into the connector until it is completely and
securely in place.
the connector on the card with the connector on the control board.
Push the card firmly into the connector until it is completely and
securely in place.
1
duplex-slot cover
1
1
wireless network connector
2
wireless network interface
card
3
wireless network interface
card guide
1
2
3