Samsung ml-7000 Guía Del Usuario

Setting Up your Printer

To print from computer software, you need to connect your printer to 
your computer with a parallel interface cable.

Cable Specifications (Not provided)

The parallel cable should be compatible with the Centronics

R

parallel 

interface and IEEE standard 1284. If you purchase parallel cable, ensure
that it :

●

Is compatible with Centronics interface.

●

Supports bi-directional communications(IEEE standard 1284)

●

Is shielded

●

Has the appropriate connector : 

- 25 pin D-Sub connector on the computer side 
- Amphenol 36 connector on the printer side

Connecting the Parallel Cable

To connect the printer to your computer use a parallel cable and 
proceed as follows.

1. Check that both the printer and the computer to which it is to be 

connected are powered off and disconnected from the power point.

2. Plug the appropriate end of the parallel cable into the connector on the 

rear of the printer.