Samsung ml-7000 Guía Del Usuario

Problem Solving

●

Distribute the toner in toner cartridge.(See page 69)

●

Adjust the ÔDensityÕ menu item setting.(See page 52)

●

Clean the inside of the printer.(See page 72.) 

●

Print a few more pages to see if the problem 

will correct itself.

●

Clean the inside of the printer.(See page 72.) 

●

Check the paper type and quality.

●

Check the paper type and quality.

●

Check the printers environment.

●

Install a new toner cartridge.

●

Check the printer cable connections.

●

Close the SM(Smart Monitor) program.

●

Check the printer cable connections.

●

You cannot monitor the status of the printer which 

is connected by network. Close the 
SM(Smart Monitor) program.

●

Much printing may accumulate toners on the 

pressure roller of fuser assy.  The accumulated toner    
may be melted and transferred on the back side of 
paper.

●

Select ÔFUSER CLEANÕ in the JOB MENU.

●

ÔFUSER CLEANÕ selection rotate the motor about 10 

seconds and print one page duplex printing of
specified pattern for fuser clean and stop.

The vertical lines are
printed on 
the page. 
Print is too light.

There are toner 
speckles.

The printer 
drops letters

The printer drops 
letters in case of
printing from Dos
mode in Windows 95

“Check parallel 
Cable/Smart Monitor
can not monitor
network printing”
appears in Smart
Monitor program.

Dirty spots on the
back side of paper of
fuser assy
contamination.

Problem

Solution