Samsung HT-DS400 Manual De Instrucciónes

63

64

You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.

• 

The selection toggles back
and forth between "FM

➝ 

AM"

each time the 

button is pressed.

Press 

button.

Select a broadcast
station.

Press the 

(   )

button to select

PRESET and then press
button to select the preset station.

Press the 

button to select the
desired band (FM,
AM).

Press the 

(   ) button

to select "MANUAL" and

then press and hold                   button to
automatically search the band.

Press 

(   ) to select

MANUAL and then briefly

press

to tune in to a lower or

higher frequency.

•

Each time the button is pressed, the sound switches between "STEREO" and "MONO".

•

In a poor reception area, select MONO for a clear, interference-free broadcast.

Press 

button to listen in Mono/Stereo. 

(This applies only when listening to an FM station.)

To tune in to a preset station, press                on the 
remote control to select a channel.

•

Refer to Step 2 on page 63 to
automatically or manually tune in
to a station.

•

Each time the button is pressed,
the band switches between 
"FM ➝ AM".

•

“PRGM” flashes in the
display. Tune in to a station.

Press             to
select "89.10".

Press the

button  and select

•

Press the 

button before

‘PRGM’ disappears from the display.

•

‘PRGM’ disappears from the display and
the station is stored in memory.

•

You can select between 1 and
15.

Press the 

button.

Press the 

button

again.

To preset another
station, repeat
steps 2 to 5.

Press
to select preset
number.

When                is pressed, a
preset broadcast station is
selected.

Press and hold                 to
automatically search for
active broadcasting stations.

Briefly press                 to
increase or decrease the
frequency incrementally.

15 FM stations

15

AM stations          

• 

Frequency Modulation

• 

Medium Wave