Samsung ls-22a13 Guía Del Usuario
English-9
To view TV channels correctly, a signal must be received by the set
from one of the following sources:
from one of the following sources:
◆ An outdoor aerial
◆ A cable TV network
◆ A satellite network (see page 10 for further details)
◆ A cable TV network
◆ A satellite network (see page 10 for further details)
1
In the first three cases, connect the aerial or network input cable to
the 75
the 75
Ω
coaxial socket on the rear of the TV.
2
If you are using an indoor aerial, you may need to turn it when
tuning your TV until you obtain a picture that is both sharp and
clear.
For further details, refer to:
tuning your TV until you obtain a picture that is both sharp and
clear.
For further details, refer to:
◆
“Automatic Storing of Channels” on page 16
◆
“Manual Storing of Channels” on page 18
➢
If you wish to subscribe to a cable network, contact your
local dealer.
local dealer.
You can connect a VCR to the TV using a:
◆ Coaxial cable
◆ S-Video cable
1
Plug the aerial input cable into the appropriate socket on the VCR.
2
Connect a coaxial cable to the:
◆
VCR aerial output socket
◆
Television aerial input socket
3
Follow the instructions supplied with your VCR to tune the VCR to
your TV.
your TV.
or
Cable Television
Network
Network
Rear of the TV
Rear of the TV
Aerial output
Aerial input
Connecting Connecting to an Aerial or Cable Television
Connecting a non-AV-Link VCR
TV Antenna
EN1-PD22SO.qxd 11/6/02 8:56 AM Page 9