Polycom 500 Guía Del Usuario

VoiceStation™ 500 - 15

2.  When the incoming call ring is 

heard, answer it as you normally 
would.

•  Redial the last number using 

the mobile phone or computer 
connected to the VoiceStation™ 500.

•  The connector cable (mobile phone 

or computer) with 2.5 mm connec-
tor needs to be removed from the 
mobile phone or computer.

Changing between calls in Wired Audio 
Mode
The Mode button can be used to swap be-
tween the POTS, Bluetooth and the Wired 
Audio calls:

1.  Making/Answering a POTS call 

when in Wired Audio Mode: Press 
the Mode button, press the On/Off 
button, make/answer the phone call.  
The Amber LED should not be lit.  
When finished, press the On/Off 
button, then press the Mode button 
again.

2.  Making/answering a Bluetooth call 

when in Wired Audio Mode: Press 
the Mode button, then make/answer 
the phone call.  The Bluetooth LED 
should be on (blue). When finished, 
press the Mode button again. The 
LED should return to amber.

1.  Press the Mute button on the 

VoiceStation™ 500 to mute/unmute 
a call as described in the “POTS 
Mode” section of this User Guide or;

2.  The mobile phone Mute/Unmute 

button can be used.

1.  Press the Volume Up/Down buttons 

on the VoiceStation™ 500 to adjust 
the volume to the desired level as 
described in the “POTS Mode” sec-
tion of this User Guide or;

2.  Use the mobile phone to adjust the 

volume.

•  Please refer to the ‘Record a Conver-

sation’ section of this User’s Guide 
as described in the “POTS Mode” 
section of this User Guide.

1.  End the phone call as you normally 

would.

2.  Unplug the cable from the 

2.5mm port on the side of the 
VoiceStation™ 500.  The amber 
LED should turn off, bringing the 
VoiceStation™ 500 to POTS mode.