Polycom IP 300 Notas De La Versión

Release Notes - SIP Application

Notes

Page 21

3.3 Outstanding Issues

The following issues will be fixed in a subsequent release.

• 4310:

No QoS support for signaling protocol (TCP)

Workaround: The default QOS parameters will still be used for TCP signaling
packets, and these may be specified in the sip.cfg configuration file.

• 5085:

Cannot answer an incoming call while directory is being saved

Workaround: None.

• 6527:

Shared line does not ring if incoming call arrives when phone is playing

dialtone then subsequently hangs up
Workaround: None.

• 8532:

Subnet mask forces all packets through gateway when not using DHCP

and when using the wrong subnet mask for the network class in use, for
example using 192.168.X.X addresses with a 255.255.0.0 subnet mask
Workaround: Use the correct subnet mask.

• 8547:

Local ringback is not played if far end does blind transfer without going

on hold
Workaround: None.

• 8921:

Centralized conference fails due to RTP port being slow to open in some

cases
Workaround: None.

• 9176:

Memory leak in phone if it tries to upload log files into a non-existent

folder which is specified by LOG_FILE_DIRECTORY
Workaround: Specify a valid folder destination in LOG_FILE_DIRECTORY.

• 9292:

IP 4000 reboots upon downloading a wave file with a path containing ‘\’

instead of ‘/’
Workaround: Wave file paths must be specified using ‘/’ e.g. “wavs/ring1.wav”.

• 9709:

RTCP not sent or received when calls are on hold

Workaround: None.

• 11588:

The local contact directory feature cannot be disabled

Workaround: None.

• 11653:

Startup of phone make get delayed indefinitely because of some tasks

getting unrealistic delays
Workaround: This issue is mitigated by the workaround implemented in 15012. This
issue is worse with slow boot servers.

• 12155:

SoundPoint IP 300 and 301 phones have no “Exit” softkey during the

ACD login process
Workaround: Exit the display by pressing the Menu key or lifting and replacing the
handset.

• 12455:

On SoundPoint IP 601 phone, per-contact directory settings such as

auto-divert do not work for calls arriving on lines 7 to 12
Workaround: None.