Polycom EX Guía Del Software
System Commands
© Polycom, Inc.
131
mpmode
Description
This command sets or gets the multipoint conference viewing mode for the
system in a multipoint call. The multipoint mode can be set to auto,
discussion, presentation, or fullscreen. By default, it is set to auto.
system in a multipoint call. The multipoint mode can be set to auto,
discussion, presentation, or fullscreen. By default, it is set to auto.
Note
This command is not available on the ViewStation EX unless you
purchase the multipoint option.
purchase the multipoint option.
Syntax
mpmode <auto|discussion|presentation|fullscreen|get>
Example
mpmode discussion
User Interface Screen Location
System Info > User Setup: Multipoint Mode
Parameter
Definition
auto
In Auto mode, the system switches between Full Screen
Mode and Discussion mode, depending on the
interaction between the sites. If one site is talking
uninterrupted for 15 seconds or more, the speaker
appears full screen.
Mode and Discussion mode, depending on the
interaction between the sites. If one site is talking
uninterrupted for 15 seconds or more, the speaker
appears full screen.
presentation
In Presentation mode, the person who is speaking
appears full screen to the far sites, while the person
who is speaking sees all the other sites on a split screen.
appears full screen to the far sites, while the person
who is speaking sees all the other sites on a split screen.
discussion
In Discussion mode (also called Continuous Presence
mode), every site sees all the sites in the meeting at the
same time, on a split screen.
mode), every site sees all the sites in the meeting at the
same time, on a split screen.
fullscreen
In Full Screen mode, every site in the call sees the
current speaker, or the latest person to speak, on the full
screen.
current speaker, or the latest person to speak, on the full
screen.
get
Returns the current setting for this option.