Polycom EX Guía Del Software
API Guide for ViewStation EX, ViewStation FX, and VS4000
150
www.polycom.com/videodocumentation
preset
Description
This command sets camera presets or goes to the presets for the near or far
camera source. It can also register or unregister the shell session to give
notification when someone sets or goes to presets. You can set and store up
to ten preset camera positions. These ten camera presets can be distributed
across the far camera and up to four near-site cameras.
camera source. It can also register or unregister the shell session to give
notification when someone sets or goes to presets. You can set and store up
to ten preset camera positions. These ten camera presets can be distributed
across the far camera and up to four near-site cameras.
Syntax
preset <register|unregister|near|far>
preset <near|far> <set|go> <“preset”>
Example
preset near set 2
The current location/position of the near end camera is saved as near
preset 2.
preset 2.
Parameter
Definition
register
Registers the system to give notification when the user
sets or goes to presets.
sets or goes to presets.
unregister
Disables register mode.
near
Specifies the near camera. Requires a set or go
parameter and a “preset” identifier.
parameter and a “preset” identifier.
far
Specifies the far camera. Requires a set or go parameter
and a “preset” identifier.
and a “preset” identifier.
preset <near|far>
Parameter
Parameter
Definition
set
Sets a camera preset. Requires a “preset” parameter.
go
Moves the camera to a camera preset. Requires a
“preset” parameter.
“preset” parameter.
“preset”
Camera preset identifier. Must be an integer in the
range {0..9}.
range {0..9}.