Polycom EX Guía Del Software
System Commands
© Polycom, Inc.
155
registerall
Description
This command simultaneously registers all user feedback, that is all changes
that have been made to any of the parameter types listed in the following
table. This allows you to be informed via the API interface of all user actions
and is particularly useful when two different control systems are being used
simultaneously, such as the web and API commands. The system maintains
the registration changes through restarts. The registerall command also
returns all current settings.
that have been made to any of the parameter types listed in the following
table. This allows you to be informed via the API interface of all user actions
and is particularly useful when two different control systems are being used
simultaneously, such as the web and API commands. The system maintains
the registration changes through restarts. The registerall command also
returns all current settings.
To unregister user feedback, use the unregisterall command.
Note
The function and syntax of registerall and register all are identical.
Syntax
registerall
Parameter
Definition
registerall
Registers changes to any of the following types of
parameters:
parameters:
• Current near end or far end source
• State of privacy
• Current volume level
• Active camera presets
• Status of point-to-point or multipoint calls
• Status of physical ISDN/IP connection to codec
• PIP state
• Visual Concert state
• Chair control
• System information
• Gatekeeper status