Polycom EX Guía Del Software
System Commands
© Polycom, Inc.
219
vcraudioout
Description
This command sets or gets the VCR Audio Out Always On option. When this
option is enabled, the system can operate with two VCRs, one for recording
and one for play. This also allows the use of the VCR audio out for room audio
applications where the near-site and the far-site audio are required with any
video input selected.
option is enabled, the system can operate with two VCRs, one for recording
and one for play. This also allows the use of the VCR audio out for room audio
applications where the near-site and the far-site audio are required with any
video input selected.
Note
If you connect the same device to both the VCR input and VCR output,
you may need to disable this feature to prevent an audio feedback
loop.
you may need to disable this feature to prevent an audio feedback
loop.
Syntax
vcraudioout <yes|no|get>
Example
vcraudioout yes
User Interface Screen Location
System Info > Admin Setup > Video/Cameras > VCR: VCR Audio Out
Always On
Always On
Parameter
Definition
yes
Enables the option.
no
Disables the option.
get
Returns the current setting (yes or no).