Polycom EX Guía Del Software
API Guide for ViewStation EX, ViewStation FX, and VS4000
250
www.polycom.com/videodocumentation
prilinebuildout
Description
This command sets or gets the PRI line buildout for a T1 interface. If you are
using an internal CSU, enter the output attenuation in dB. If you are using an
external CSU, enter the output attenuation in feet.
using an internal CSU, enter the output attenuation in dB. If you are using an
external CSU, enter the output attenuation in feet.
Syntax
prilinebuildout <set|get> <“attenuation in dB”|“attenuation in feet”>
Example
prilinebuildout set -7.5
User Interface Screen Location
System Info > Admin Setup > Video Network > IMUX > PRI Network >
PRI Setup: Line Buildout
PRI Setup: Line Buildout
Note
This screen is only accessible if you have a PRI network interface
connected to your system.
connected to your system.
Parameter
Definition
set
Sets the PRI line buildout. It requires an output
“attentuation in dB” or an “attenuation in feet”.
“attentuation in dB” or an “attenuation in feet”.
get
Returns the current setting.
“attenuation in
dB”
dB”
Output attenuation values in dB. For internal CSUs.
Available values are
Available values are
• 0
• -7.5
• -15
• -22.5
“attenuation in
feet”
feet”
Output attenuation values in feet. For external CSUs.
Available values are:
Available values are:
• 0-133
• 134-266
• 267-399
• 400-533
• 534-665