Polycom EX Guía Del Software
System Commands
© Polycom, Inc.
23
audioqualityg7221
Description
This command sets or gets the call speed threshold that determines which
audio protocol is used. At the selected speed or lower, the system uses the
G.722.1 audio protocol. Above the selected speed, the system uses the G.722
audio protocol.
audio protocol is used. At the selected speed or lower, the system uses the
G.722.1 audio protocol. Above the selected speed, the system uses the G.722
audio protocol.
G.722.1 supports enhanced frame loss concealment and works automatically
and transparently between systems supporting this audio standard. This is
based on an algorithm that detects and replaces missing speech data, thus
maintaining high-quality audio.
and transparently between systems supporting this audio standard. This is
based on an algorithm that detects and replaces missing speech data, thus
maintaining high-quality audio.
Syntax
audioqualityg7221 <set|get> <
{64..512}>
Example
audioqualityg7221 set 256
User Interface Screen Location
System Info > Admin Setup > Phone/Audio: Audio Quality
Parameter
Definition
set
Sets the call speed threshold value. Requires a
parameter from the {64..512} range.
parameter from the {64..512} range.
get
Returns the current threshold value of the call.
{64..512}
Required value from the range of selectable speeds. The
available speeds are 64, 112, 128, 168, 192, 224, 256, 280,
320, 336, 384, 392, 448, and 512.
available speeds are 64, 112, 128, 168, 192, 224, 256, 280,
320, 336, 384, 392, 448, and 512.