Polycom EX Guía Del Software
System Commands
© Polycom, Inc.
41
camerainput
Description
This command sets video inputs on cameras 1-4 for the VS4000 system only.
You can connect four cameras to your VS4000 system.
You can connect four cameras to your VS4000 system.
Note
Use the commands
page 39 to set the VS4000 system’s camera source 1 and 4 to
pan-tilt-zoom mode.
pan-tilt-zoom mode.
Syntax
camerainput <{1..4}> <off|s-video|composite|get>
Example 1
camerainput 1 s-video
Example 2
camerainput 4 get
may return:
camerainput 4 off
User Interface Screen Location
System Info > Admin Setup > Video/Cameras > Cameras > VS4000 Camera
Setup: Primary Camera
Setup: Primary Camera
Parameter
Definition
{1..4}
Selects the camera source.
off
Disables the selected camera source.
s-video
Enables S-video inputs on the selected camera source.
Note: You can only set three cameras (1, 2, and 4) to
S-video.
S-video.
composite
Enables composite inputs on the selected camera
source.
source.
get
Returns the current camera input status for the selected
camera source.
camera source.