Polycom EX Guía Del Software
API Guide for ViewStation EX, ViewStation FX, and VS4000
64
www.polycom.com/videodocumentation
dns
Description
This command is used to set the IP address of up to four DNS servers. After
a change is made, the system prompts you for a restart.
a change is made, the system prompts you for a restart.
Note
This option can only be set when DHCP is off.
Syntax
dns <set|get> <{1..4}>
Examples
dns set 1 192.168.1.111
dns get 4
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > LAN/Intranet > LAN & Intranet:
DNS Servers
DNS Servers
Parameter
Definition
set
Sets the IP address of the specified DNS server when
followed by the parameter “ipaddress”.
followed by the parameter “ipaddress”.
A server identification number {1..4} is required.
To erase the current setting, omit the “ipaddress”
parameter.
parameter.
get
Returns the current IP address of the specified server.
A server identification number {1..4} is required.
“ipaddress”
The IP address of the specified DNS server.