Polycom EX Guía Del Usuario

This command sets the Auto Answer Multipoint mode which 
determines how the system will handle an incoming call in a 
multipoint videoconference.

If Auto Answer Multipoint is set to Yes, any incoming 
call will be connected automatically. The screen will split 
into a multipoint call progress screen as the incoming 
call is answered.

User Interface: If Auto Answer Multipoint is set to No 
and there is an incoming call, the user will be prompted 
with a message “You have a video call. Would you like 
to answer?". This message can be followed by a far-site 
video number and a far-site name if they are available. 
If the user selects Yes, the call will be added into the 
ongoing conference. If the user selects No, the call will 
be rejected. The factory default is set to No.

API Interface: If Auto Answer Multipoint is set to No, 
there is an incoming call, and the user has previously 
issued the "listen video" command, the string "listen 
video ringing" will be printed in the Telnet session.

donotdisturb If Auto Answer Multipoint is set to donotdisturb, the 

user is not notified of the incoming call. The site which 
placed the call receives a Far Site Busy code (H.320) or 
Call Rejected (H.323).

Displays the current setting (yes, no, donotdisturb).

Note  ViewStation EX: this multipoint option is not available unless 

you update your ViewStation EX system to support 
multipoint capabilities. For more information, refer to the 
ViewStation EX User Guide.

mpautoanswer donotdisturb